Do it yourself Acrylic Frames | How to Make & Hold Your 3D Art

On the lookout for a way to jazz up your wall art? Attempt building your possess Diy acrylic frames for customized 3D artwork. This submit will walk you via exactly how I produced these in my household.

If you are wanting for a tailor made way to frame your photos or artwork to make it stand out from the wall, these Diy acrylic frames are the ideal issue.

I landed on these frames for the reason that I needed a tiny some thing to incorporate a little more pizzazz to my toilet wall.&nbsp

We determined to incorporate my husband&rsquos love of golfing into the blend by printing shots he took of PGA golf classes he&rsquos played in black and white.

I really like when artwork is a discussion piece, so this was the fantastic addition to the bathroom wall.

To make it definitely stand out, I created these Do it yourself acrylic frames for every single of the shots.

Below are the measures I took&hellip&nbsp

Table OF CONTENTS

• 1. Gather your products.
• two. Tape each individual facet of just about every corner.
• three. Mark where by you want to drill your holes.
• 4. Drill your holes.
• 5. Use your glue dots to safe your photographs to the body.
• six. Mark the entire on the wall in which you strategy to hang it.
• 7. Use your punch resource to mark the entire on the wall.
• eight. Drill your holes in the wall.
• nine. Screw the standoffs into the wall.
• ten. Attach your frame to the standoffs.
• eleven. Revel in the completed merchandise!

Disclaimer: This submit does involve affiliate hyperlinks for your benefit. This is at NO further price to you but earns me a smaller fee. To browse extra, look at out our&nbspdisclosure plan.

1. Obtain YOUR Products.

1st points first, acquire all your supplies. All sources for all the things I used are linked below. I also included a listing with backlinks of what we utilised to dangle the frames, as well.&nbsp

FOR Making THE Diy ACRYLIC FRAMES:

• Plexiglass/Acrylic Sheets
• Standoffs
• Glue Dots
• Piece of Lined Paper
• Drill&nbsp
• Drill Bits&nbsp(a person for the dimension of the opening of your standoffs and just one for the screw for the wall)
• Painter&rsquos Tape
• Ruler
• Marking Device (I made use of a Sharpie)

FOR HANGING THE Diy ACRYLIC FRAMES:

• Pencil
• Handheld Degree
• Punch
• Screwdriver

2. TAPE Every Facet OF Every CORNER.

Plexiglass/acrylic is quite sensitive.

Mainly because of this, you have to be pretty mindful when you are drilling the holes.

Putting a piece of painter&rsquos tape on possibly side the place you plan to drill your hole will help continue to keep the acrylic sheet from breaking or cracking when you drill.

I also saved the protective address on each individual aspect of the piece, far too.

3. MARK Wherever YOU WANT TO DRILL YOUR HOLES.

At the time you have put the painter&rsquos tape on all 4 sides (or having said that several areas you approach to drill a hole), you can location a mark of exactly where you want to drill your hole.

I drilled my holes 1&Primary in from each individual edge as you can see from the picture above.

four. DRILL YOUR HOLES.

Prior to actually drilling, double and triple look at that your marks are degree each horizontally and vertically.

You&rsquoll want to have these stage for when you dangle them.&nbsp

The drill little bit you choose must be significant ample to enable the standoff to match in just the hole.

I would do a examination operate on a piece of scrap substance to make guaranteed it is large enough.&nbsp

Once you are particular that the marking are level and the little bit is huge enough, you want to start off drilling.

Listed here is a superior online video to comply with if you would like a demonstration on&nbsphow to drill by way of acrylic.

You want to use about 50 % energy when you are drilling.

Slow and regular. If you go to quick, the acrylic will crack, so take your time.

As you drill you ought to see spirals of the acrylic slowly becoming removed.&nbsp

Repeat the drilling for every single hole you will need.

five. USE YOUR GLUE DOTS TO Safe YOUR Images TO THE Frame.

After your holes are made, you can include your photograph to the piece of acrylic/frame.

The key here is to again, make sure your photograph is degree right before you wholly safe it to the body.

The glue dots are incredibly sticky and don&rsquot allow for a ton of wiggle home, so it could be a excellent strategy to line up a piece of lined paper powering the body to assistance you line the edges of your picture.

What ever trick operates for you to make certain the photo receives glued to the body degree will do.&nbsp

6. MARK THE Full ON THE WALL The place YOU Approach TO Dangle IT.

As you start off to dangle, mark your holes on the wall, but make certain your frame is stage.

If you calculated properly in the move ahead of drilling, the holes on your body really should presently be degree.

If you are hanging much more than a single frame like I did, make certain every single body is level in your grid, far too.&nbsp

seven. navigate here PUNCH Instrument TO MARK THE Whole ON THE WALL.

I like this tool so significantly since it gets your gap began and allows your drill to stay in area when you begin drilling.

If you don&rsquot have just one, I really recommend it!

eight. DRILL YOUR HOLES IN THE WALL.

Be absolutely sure to use a little bit that matches the screws that arrived alongside with your standoffs.

This will most likely be a scaled-down bit than the one you applied on the frames.

I also employed a stud finder to see if I necessary drywall anchors, but mainly because these frames are not that weighty, you could likely do without having them.

9. SCREW THE STANDOFFS INTO THE WALL.

After you obtain your standoffs, you&rsquoll see how they get the job done.

In order for the image to &ldquostand off&rdquo the wall, you have to safe the standoff with the provided screw right before attaching the picture to the standoffs.

As you can see from the photo, creating positive every little thing is stage and calculated the right way is tremendous essential.&nbsp

ten. Connect YOUR Body TO THE STANDOFFS.

After you&rsquove attached the standoffs, it&rsquos time to connect the photos!

Line up the standoffs with your drilled holes and safe the standoffs.

If all goes effectively, all the things will line up properly and be ready to go!

If you are like my dad and I, you&rsquoll arrive throughout at minimum one particular that doesn&rsquot line up completely.

For this, we cheated a minimal little bit and secured the standoff to the frame and used a glue dot to protected it to the wall, so it didn&rsquot go.

We only experienced to do this for two corners of two frames, but don&rsquot stress if you mess up one&hellip We&rsquove been there!&nbsp

11. REVEL IN THE Concluded Product or service!

Now it&rsquos time to delight in your do the job!

We did a grid of nine full shots which was a massive undertaking with all the measuring, but I&rsquom in adore with how it turned out.

Let me know in the responses what you think of the finished solution!